Power Flushing

Power Flushing

Aph power flushing process is a versatile, easy to use and highly effective method of flushing heating systems. By utilizing aph-heating system flushing pumps, heating systems can be purged of sludge, scale and corrosion deposits with minimal dismantling and disruption.
HOW DOES IT WORK?
The aph heating power flushing pump is simply connected into the heating system, either across standard circulator pump couplings, across the tails of one radiator, or wherever most practicable. The powerful flow, combined with instantaneous flow reverser device, will dislodge and mobilize deposits and corrosion, which resist traditional system cleaning methods.
Once the corrosion and sludge deposits have been loosened and mobilized, fresh clean water is forced through the heating system, pushing the contaminated water out through a full bore dump valve to waste. During the aph heating process, radiators are individually flushed, without removing or disconnecting them from the system, by directing the full output of the pump through each radiator separately.
At the end of the flushing process, the system contains fresh clean water and reinstatement of the system to normal operation takes only a few minutes.
System flushing will not remedy design or mechanical faults, which should be rectified, but in many cases it will cure the problems caused by these.

Click the image to see a working diagram of the symptoms, which indicate that Power Flushing would be beneficial.

Symptoms
• Radiators slow to warm up.

• Radiators with cold spots. 

• Sludge in pipe work making noises
.
• Pinholes in radiators.
• Radiators frequent need bleeding. 

• Boiler noises
.
• Long recovery time after drawing hot water
.
• Constant failure of pumps and valves.